SATA to IDE Vertical Bridge (SATA device)

Easily convert your SATA Drive into a IDE Drive

This SATA-to-Ultra ATA-133 Converter Board is a converter solution for the Parallel Ultra ATA Device. It has a standard 40 pin ATA port can interface to a parallel Ultra ATA (IDE) devices (hard disk, CDROM, etc). It accepts SATA commands through the Serial ATA interface from the host, and decodes the commands and converts them to parallel ATA commands to the device. Response from the device through the parallel ATA bus are deciphered, processed and converted to SATA protocol and sent to the host. This SATA-to-Ultra ATA-133 Converter Board supports the Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s) on the serial side and is compatible with Ultra ATA-133 on the parallel ATA side.

All EIDE Type DVD / DVD-RAM / CD-ROM / CD-RW / HDD become new serial ATA devices

Attach this mini converter board to back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, etc.) and make them into new Serial ATA Devices which meet new Serial ATA standards. This dangle board can support HDD larger than 137GB.

Features:

• 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
• Mini board size, no space wasted
• High transfer rate of 1.5 Gb/s
• Compliant with Serial ATA 1.0 Specifications
• Support Spread Spectrum in receiver
• Converts parallel ATA hard drive to Serial ATA
• Supports ATA/100 or ATA/133 IDE hard drive

Requirements:

• For PC Users: Windows 98 / 98SE / ME /2000 / XP / Vista / 7
• For MAC Users: Mac OS X

Package Contents:

• Serial ATA Convert board
• Y Power Cable
• Manual

Sabrent Item - SBT-STDB