Powercom BNT-600AP, 3 UPS + 1 Surge 600VA/360W

SOLD OUT

Up to 35 Minutes (16 minutes w/ a full load

This fully digitized microprocessor controlled line interactive UPS support auto voltage regulation, cold starting, lightning and surge protection, tel/modem internet surge suppression and use software to schedule shutdown, record power failure history and show basic parameters such as input/output voltage, input/output frequency, battery level, load level.

Model Type: BLACK KNIGHT PRO
Model Name: BNT-600AP

AC INPUT

• AC Input Capacity on Battery: 600VA
• AC Input Voltage: 100V or 110V/115V/120V or 220V/230V/240V +/- 25% at line input
• AC Input Frequency: 50 or 60 Hz+/-5% (auto sensing)
• AC Input Transfer: N/A

AC OUTPUT

• AC Output Voltage: Simulated sine wave at 100V or 110V/115V/120V or 220V/230V/240V
• AC Output Frequency: 50 or 60 Hz +/- 0.5%
• AC Output Voltage Regulation: AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 13% below input voltage if +9% to +25% of nominal
• AC Output Transfer: 2/4 milliseconds, including detection time

PROTECTION

• Protection Spike: 480 Joules / 2ms
• Protection Overload: UPS automatic shutdown if overload exceeds 110% nominal at 60 sec and 130% at 3 sec
• Protection Unit: Fuse for overload & short circuit protection
• Protection Inside Protection: UPS output cut off immediately or input fuse protection

BATTERY

• Battery Type: Sealed, Maintenance-free lead acid batteries with 3-6 year typical lifetime
• Battery Typical: 6 hours (to 90% of full capacity)
• Battery Protection: Auto discharge protection
• Battery Run Time: 25 - 35 minutes